صور الصفحة
PDF
النشر الإلكتروني

Hence the electromotive force required to produce a spark between convex surfaces, as in Lane's electrometer, is less than if the surfaces had been plane and at the same distance.

When the air-space is large, the path of the sparks, and therefore the electromotive force required to produce them, is exceedingly irregular. The accompanying figure is from a photograph of a succession of sparks taken between the same electrodes from four Leyden jars charged by Holtz's machine.

A portion of the path near the positive electrode is nearly straight, there is then a sharp turn, which, in all the sparks represented, is in the same direction. Beyond this the course of the spark is very irregular, although its general direction is deflected towards the same side as the first sharp turn.

[graphic][merged small]

Theory of two circular disks on the same axis, their radii being small compared with the distance between them.

A circular disk may be considered as an ellipsoid, two of whose axes are equal, while the third is zero, and we may apply the method of ellipsoidal co-ordinates to the calculation of the potential*. In the

* See Ferrers' Spherical Harmonics, p. 136.

case before us everything is symmetrical about the axis, so that we have to consider only the zonal harmonics, and of these only those of even order, unless we wish to distinguish between the surface density on opposite sides of the same element of the disk, for this depends on the harmonics of odd orders.

Let a be the radius of the first disk, b that of the second, and c the distance between them.

We shall use ellipsoidal co-ordinates confocal with the first disk. Let and 2 be the greatest and least distances respectively of a given point from the edge of the disk, and let

༡༩

[blocks in formation]

then if is the distance of the point from the plane of the disk, and r its distance from the axis,

[blocks in formation]

If the surface-density of the electricity on the disk is a function of the distance from the axis, it may be expressed in the form

[merged small][ocr errors][subsumed][merged small][ocr errors][merged small][merged small][merged small][merged small][merged small][merged small]
[ocr errors]

and P is the zonal harmonic of order 2n. Only even orders are admissible, for since every element of the disk corresponds to two values of p, numerically equal but of opposite signs, a term involving an harmonic of odd order would give the surface-density everywhere zero.

The potential arising from this distribution at any point whose ellipsoidal co-ordinates are w= αμ and n= = av

[blocks in formation]

In this expression Q', (v) denotes a series, the terms of which are numerically equally to those of Q, (v), the zonal harmonic of the second kind, but with the second and all even terms negative. If we put i for 1, we may write

[blocks in formation]

This expression is an infinite series, the terms of which increase without limit when v is diminished without limit.

It may, however, be expressed in the finite form*

[blocks in formation]

that is to say P',,(v) is a zonal harmonic of the first kind with all its terms positive, and Z ̧ (v) is a rational and integral function of v of 2n − 1 degrees, which is such as to cancel all the terms of P ́ ̧„(v) tan ̄1 which do not vanish when v becomes infinite.

of v.

The expression (11) is applicable to small as well as great values Thus we find when v is 0, as it is at the surface of the disk,

[ocr errors][merged small][merged small][merged small][merged small]

The potential at any point of the disk is therefore the sum of a series of terms, the general form of which is

[subsumed][ocr errors][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small]

Since we have to determine the value of the potential arising from the first disk at a point in the second disk for which z=c at a distance r from the axis, and if we write

[blocks in formation]

where b is the radius of the second disk, and p is a quantity corresponding to μ in the first disk, then the most convenient expression for the potential due to the first disk at a point (p) in the second, is

[blocks in formation]

where U denotes the value of the potential at the axis, and where, after the differentiations, va is to be made equal to c.

To investigate the mutual action of the two disks, let us assume that the surface-density on the second disk is the sum of a number of terms of which the general form is

[merged small][merged small][ocr errors][merged small][ocr errors][merged small][merged small]

The potential at the surface of the second disk arising from this distribution will be the sum of a series of terms of the form

T1 (2n !)2

BP(P).

2 b 2 (n!)*

2n

(19)

The potential arising from the presence of the first disk is given in equation (17).

Having thus expressed the most general symmetrical distribution of electricity on the two disks and the potentials thence arising, we are able to calculate the potential energy of the system in terms of the squares and products of the two sets of coefficients A and B.

[merged small][ocr errors][merged small][merged small]

when the integration is to be extended over every element of surface ds.

Confining our attention to the second disk, the part of W thence arising is

[merged small][ocr errors][merged small][merged small]

and the part arising from the term in the density whose coefficient is B. is

2n

[merged small][ocr errors][merged small][merged small]

The part of the value of V which arises from the electricity on the second disk itself is the sum of a series of terms of the form (19). The surface-integral of the product of any two of these of different orders is zero, so that in finding the potential energy of the disk on itself we have to deal only with terins of the form

[merged small][merged small][merged small][ocr errors][merged small][merged small][merged small]

The energy arising from the mutual action of the disks consists of terms whose coefficients are products of A's and B's, and in calculating these we meet with the integral*

[subsumed][ocr errors][ocr errors][subsumed][merged small][merged small]

We have, therefore, for the harmonic of order zero.

[blocks in formation]

*I am indebted for the general value of this integral to Mr W. D. Niven, of Trinity College.

Potential at the surface of the first disk V

=

π

2 a

A.

Potential at the surface of the second disk, arising from this distribution of electricity on the first,

[merged small][merged small][merged small][merged small][merged small][merged small][subsumed][subsumed][ocr errors][subsumed][merged small][merged small][merged small][ocr errors][subsumed][subsumed][subsumed][merged small][merged small][ocr errors][merged small][merged small][merged small][ocr errors][ocr errors][merged small][merged small][merged small][subsumed][ocr errors][ocr errors][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small]

We have next to calculate the energy arising from this distribution on the first disk, together with a corresponding distribution

« السابقةمتابعة »