صور الصفحة
PDF
النشر الإلكتروني
[blocks in formation]

the horizontal lines indicating, as before, that the quantities under them belong to the surface itself.

In case the sphere communicates with the earth, ẞ is evidently equal to zero, and is completely determined by the above: but if the sphere is insulated, and contains any quantity of electricity, the value of ẞ may be ascertained as follows: Let be the value of the potential function without the surface, corresponding to the value Vẞ-A within it; then, by what precedes

[blocks in formation]

A' being determined from 4 by the following equations:

a

A=q,(r), y,(r)==&($), A' == y,(r'),

and r', being the radius corresponding to the point p', exterior to the sphere,

to which A' belongs.

Therefore by equating

When is infinite, we have evidently V' =

Չ

B

Α' or 3 Q + r'A';

r' being made infinite. Having thus the value of B, the value of becomes known.

To give an example of the application of the second equation in ; let us suppose a spherical conducting surface, whose radius is a, in commu-nication with the earth, to be acted upon by any bodies situate within it, and B' to be the value of the potential function arising from them, for a point p' exterior to it. The total potential function, arising from the interior bodies and surface itself, will evidently be equal to zero at this surface, and consequently (art. 5), at any point exterior to it. Hence V'B' 0; V' being due to the surface. Thus the second of the equations (9) becomes

[blocks in formation]

We are therefore able, by means of this very simple equation, to determine the density of the electricity induced on the surface in question.

Suppose now, all the interior bodies to reduce themselves to a single point P, in which a unit of electricity is concentrated, and f to be the distance Pp': the potential function arising from P will be and hence

1

1

f

B' =

[ocr errors]

'being, as before, the distance between p' and the centre of the shell. Let now b represent the distance OP, and the angle POp', then will f2= b2-2br'. cos 0+2. From which equation we deduce successively,

2df -2r+2b.cos

[blocks in formation]
[ocr errors]

=()

Making r'

=

[ocr errors]

f3

3

a in this, and in the value of B' before given, in order to ob

tain those which belong to the surface, there results

[merged small][merged small][merged small][ocr errors][merged small][merged small][merged small][merged small][merged small]

This substituted in the general equation written above, there arises

[merged small][merged small][merged small][ocr errors]

If P is supposed to approach infinitely near to the surface, so that ba―a;

a being an infinitely small quantity, this would become

[blocks in formation]

In the same way, by the aid of the equation between A and the density of the electric fluid, induced on the surface of a sphere whose radius is a, when the electrified point P is exterior to it, is found to be

[merged small][ocr errors][ocr errors][merged small]

supposing the sphere to communicate, by means of an infinitely fine wire, with the earth, at so great a distance, that we might neglect the influence of the electricity induced upon it by the action of P. If the distance of P from the surface, be equal to an infinitely small quantity a, we shall have in this case, as in the foregoing,

[merged small][subsumed][ocr errors]

From what has preceded, we may readily deduce the general value of V, belonging to any point P, within the sphere, when its value at the

surface is known.

For (g), the density induced upon an element do of the surface, by a unit of electricity concentrated in P has just been shown to be

[blocks in formation]

f being the distance P, do. This substituted in the general equation (6), art. 5, gives

V

a2-b1
Απα

'do

(10.) V = − Sdo (4) ▼ = "-b" fav

In the same way we shall have, when the point P is exterior to the sphere,

[merged small][ocr errors][merged small]

The use of these two equations will appear almost immediately, when we come to determine the distribution of the electric fluid, on a thin spherical shell, perforated with a small circular orifice.

The results just given, may be readily obtained by means of Laplace's much admired analysis (Méc. Cél. Liv. 3, Ch. 2), and indeed, our general equations (9), flow very easily from the equation (2) art. 10 of that chapter. Want of room compels me to omit these confirmations of our analysis, and this I do the more freely, as the manner of deducing them must immediately occur, to any one who has read this part of the Mécanique Céleste.

Conceive now, two spheres S and S', whose radii are a and a', to communicate with each other by means of an infinitely fine wire: it is required to determine the ratio of the quantities of electric fluid on these spheres, when in a state of equilibrium; supposing the distance of their centres to be represented by b.

The value of the potential function, arising from the electricity on the surface of S, at a point p, placed in its centre, is

[subsumed][ocr errors][subsumed][ocr errors][ocr errors][merged small]

do being an element of the surface of the sphere, the density of the fluid on this element, and the total quantity on the sphere. If now, we represent by F, the value of the potential function for the same point p, arising from S', we shall have, by adding together both parts,

F + ! ;

the value of the total potential function belonging to p, the centre of S. In

like manner, the value of this function at p', the centre of S', will be

F + 2:

F being the part arising from S, and Q' the total quantity of electricity on S'. But in consequence of the equilibrium of the system, the total potential function throughout its whole interior is a constant quantity. Hence

F +/ Q'

=

F+

Although it is difficult to assign the rigorous values of F and F"; yet, when the distance between the surfaces of the two spheres is considerable, compared with the radius of one of them, it is easy to see, that F and F will be very nearly the same, as if the electricity on each of the spheres producing them, was concentrated in their respective centres, and therefore, we have very nearly

[merged small][merged small][ocr errors][ocr errors][merged small][ocr errors][ocr errors][subsumed][ocr errors]

Thus the ratio of Q to Q' is given by a very simple equation, whatever may be the form of the connecting wire, provided it be a very fine one.

If we wished to put this result of calculation to the test of experiment, it would be more simple to write P and P' for the mean densities of the fluid on the spheres, or those which would be observed when, after being connected as above, they were separated to such a distance, as not to influence each other sensibly. Then since

[merged small][ocr errors][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small][ocr errors][ocr errors][merged small]

We therefore see, that when the distance 6 between the centres of the spheres is very great, the mean densities will be inversely as the radii; and these last remaining unchanged, the density on the smaller sphere will decrease, and that on the larger increase in a very simple way, by making them approach each other.

Crelle's Journal f. d. M. Bd. XLVI. Heft 2.

23

Lastly, let us endeavour to determine the law of the distibution of the electric fluid, when in equilibrium on a very thin spherical shell, in which there is a small circular orifice. Then, if we neglect quantities of the order of the thickness of the shell, compared with its radius, we may consider it as an infinitely thin spherical surface, of which the greater segment S is a perfect conductor, and the smaller ones constitutes the circular orifice. In virtue of the equilibrium, the value of the potential function, on the conducting segment, will be equal to a constant quantity, as F, and if there were no orifice, the corresponding value of the density would be

F ; Απα

a being the radius of the spherical surface. Moreover on this supposition, the value of the potential function for any point P, within the surface, would be

F

F.

Let therefore, + represent the general value of the density, at any point on the surface of either segment of the sphere, and FV, that of the corresponding potential function for the point P. The value of the potential function for any point on the surface of the sphere, will be F+V, which equated to F, its value on S, gives for the whole of this segment

[ocr errors][merged small][merged small]

the integral extending over the surface of the smaller segment s only, which, without sensible error, may be considered as a plane.

But, since it is evident, that is the density corresponding to the potential function V, we shall have for any point on the segments, treated as a plane,

[blocks in formation]

--1 Ꮴ
147
2л dw'

as it is easy to see, from what has been before shown (art. 4); dw being perpendicular to the surface, and directed towards the centre of the sphere; the horizontal line always serving to indicate quantities belonging to the surface. When the point P is very near the plane s, and 2 is a perpendicular from P upon s, will be a very small quantity, of which the square and

[ocr errors]
« السابقةمتابعة »